eSecurityProducts - Some keywords here

The Securion is a one-stop solution for personalizing and laminating secure badges in a decentralized way. The printer seamlessly scales to meet growing concerns about security and data forgery, while greatly extending the lifespan of any card. The printer offers dual-sided operations on both the color-printing module and the lamination station. The badge is first processed through graphical and electrical personalization. Then, a protection film, in the format of a varnish or a patch, is applied by a hot roller over the full card surface. Printing, encoding and laminating a secure badge are carried out in a single pass.

 

TOP QUALITY TECHNOLOGY AT AN AFFORDABLE PRICE

Securion’s technology is unique: PVC cards are laminated with no damage or distortion as a result. This solution provides an attractive cost per card, greatly extends the lifespan of cards and offers foolproof security. Securion also supports the composite cards required for advanced and complex applications such as driver’s licenses.

 

NEW AND HIGHLY SECURED LAMINATION FILMS

To cater to higher requirements in card security, Evolis offers an extended range of films, from basic varnish protection to patches with embedded holograms for maximum security.

 

APPLICATIONS

Securion personalizes and issues durable, tamperproof ID cards:

• ID cards
• Driver’s licenses
• Health insurance cards
• Access control badges

SPECIFICATIONS

Color printing module and laminating unit

300 dpi print head (11.8 dots/mm)

USB & Ethernet TCP-IP connection

16 MB RAM allowing two card storage devices (front & back)

Flip-over station for dual-sided printing or laminating

Detachable feeder with a capacity of 100 cards (0.76 mm or 30 mil)

Output hopper with a capacity of 100 cards (0.76 mm or 30 mil)

Reject box for 15 cards (0.76 mm or 30 mil)

Laminate film loading cassette

Two-line LCD display and a status LED

Locking system to secure access to blank cards, ribbons, films and rejected cards

Support for a Kensington® locking system

RoHS compliant

 

PRINT MODE

Color dye sublimation and monochome thermal transfer

Enhanced color management system for top quality pictures

Edge-to-edge printing

Dual-sided printing

 

LAMINATION MODE

Full card varnish and patch films

Dual-sided lamination

Speed range: 2 mm/s to 18 mm/s (0.08 inch/s to 0.71 inch/s)

Temperature range: 100° C to 180° C (212° F to 356° F)

 

ENCODING OPTIONS & ACCESSORIES

Encoding options (can be combined):

- Magnetic stripe encoder ISO 7811 HiCo/LoCo or JIS2

- Smart contact station – ISO 7816-2

- Smart contact station and encoding unit – PC/SC, EMV 2000-1

- Contactless encoding unit – ISO 14443A, B, ISO 15693, Mifare, DesFire, HID iCLASS

- Other types upon request

100-card additional feeder: red, blue, green

 

RIBBON TYPES FOR THE PRINTER MODULE

2-panel KO black monochrome ribbon – 500 cards/roll

5-panel YMCKO color ribbon – 200 cards/roll

6-panel YMCKO-K color ribbon – 200 cards/roll

Half-panel YMCKO color ribbon – 400 cards/roll

Monochrome ribbons – 1,000 cards/roll (black, red, green, blue, white, gold and silver)

 

FILM TYPES FOR THE LAMINATION MODULE

Generic thin holographic overlay film, full card – 350 and 400 cards/roll

Clear patch 1 mil film – 200 cards/roll

Clear patch 0.5 mil film – 200 cards/roll

Alternate patch Front/ Back 0.5 and 1.0 mil – 100 cards/roll

Special patches and thin overlay films upon request: holograms, security inks, custom cutting

 

PRINTING AND LAMINATING SPEED

YMCK-K, 1.0 mil patch single-side – 85 to 105 cards/hour

YMCK, 1.0 mil patch single-side – 95 to 120 cards/hour

 

CARD FORMAT

ISO CR-80 – ISO 7810 (53.98 mm x 85.60 mm – 3.375" x 2.125")

 

CARD TYPE

All PVC, Composite PVC cards

Lamination on regular PVC card, recommended with 0.5 mil patch or thin varnish

 

CARD THICKNESS

From 0.25 mm (10 mil) to 1 mm (40 mil)

No lamination under 0.50 mm (20 mil), recommended from 0.76 mm (30 mil min.)

 

RESIDENT FONTS

Arial 100, Arial bold 100

Barcode – Code 39, 2/5 interleaved, Code 128, EAN13

 

SUPPORTED PLATFORMS

Windows™ !"#XP and Vista 32 & 64 bits

Other Windows™ versions, Macintosh™ OS X, Linux upon request

 

SUPPLIED SOFTWARE

eMedia Card Designer Software for designing and editing badges (30-day trial version):

- Compatible with Windows™ !"#XP, Server 2003 and Vista 32 & 64 bits

- Connection to Microsoft™ Excel databases

 

INTERFACE

USB and Ethernet TCP-IP (USB cable supplied)

 

PRINTER FORM FACTOR

Without card hopper: 274.64 mm (10.81") (H) x 562.70 mm (22.15") (L) x 262.16 mm (10.32") (W)

With card hopper: 274.64 mm (10.81") (H) x 658.20 mm (25.91") (L) x 262.16 mm (10.32") (W)

 

PRINTER WEIGHT

15.4 Kg (33.15 Lbs)

 

POWER SUPPLY

Power supply: 100-240 V AC, 50-60 Hz, 2 A

Printer: 24 V DC, 6.25 A

 

ENVIRONMENTAL CONDITIONS

Min/Max operating temperature: 15° / 30° C (59° / 86° F)

Humidity: 20% to 65% non-condensing

Min/Max storage temperature: -5° / +70° C (23° / 158° F)

Storage humidity: 20% to 70% non-condensing

Operating ventilation: free air

 

WARRANTY

2 years (printer, lamination module, print head and lamination hot roller), or 100,000 inserted cards,

whichever comes first1

1 Subject to observance of specific conditions and use of Evolis genuine consumables.