This pcProx USB (Emulating RS-232 Serial Port) model produces the same ASCII character output (not keystrokes like the other USB offerings), but does it through the USB port.
This pcProx USB (Emulating RS-232 Serial Port) model produces the same ASCII character output (not keystrokes like other pcProx USB offerings), but does it through the USB port. This model requires a specific driver that will set up a Virtual Serial Port for the application utilizing the prox card information. The software application will 'see' this reader as a serial port device.
The end user may selectively include/exclude any card information by configuring the reader's memory. Additionally, the user may format the facility and ID codes, define separator characters, and append characters such as CR or TAB to the ID to further enhance using reader with a 3rd party applications.
Although the reader attaches to the USB port, the driver will redirect it to a COM port. The device or software will communicate with the reader using communications parameters: 9600 baud, No parity, 8 data bits, 1 stop bit, no handshaking. Output is ASCII decimal or hex.
Typical Maximum read range:
1.0” – 3.0” (2.5 – 7.6cm) dependent upon proximity card type and environmental conditions
Dimensions:
3 3/8” x 2” x 0.6” (Models with RDR in part number only) 4.2” x 2.5” x 0.875” (10.6 x 6.35 x 2.2 cm)
Weight:
0.45 lbs (12.7g)
Power supply and interface: USB self-powered
Indicators:
Tri-state LED, beeper
Transmit frequency:
125 kHz
Operating temperature range:
-22° to 150°F (-30° to 65°C)
Operating humidity range:
5% to 95% relative humidity, non-condensing
Storage temperature range:
-40° to 185°F (-40° to 85°C)
Interface:
USB
Certifications:
FCC, United States; CE Mark Europe; C-tic Australia; RoHS
