|
Mounting
Single-gang style electrical box
Dimensions
3.3” W x 4.8” H x 1.5” D
(83.8 mm x 121.9 mm x 36.3 mm)
Weight
6.8 oz (.195 kg)
Style
Attractive UL94 polycarbonate
enclosure protects components from damage and all connections are fully
identified by silk-screened nomenclature.
Browser Support
Firefox® versions 2 and 3
Windows® Internet Explorer® versions 6, 7 and 8
Card Data Formats
Supports any card data format up to 128 bits
Hardware
32-bit RISC CPU, 100 MHz processor
Memory
8 MB onboard Flash memory
32 MB SDRAM
256K SRAM
Visual Indicators
Two LEDs indicate power/network activity and device I/O activity.
Power Supply Requirements
1 A @ 12-16 VDC maximum
Recommended:
Power is supplied using the Power over Ethernet technology available
with PoE (802.3af ) enabled network devices.
Alternate:
Supervised linear power supply with battery backup, input surge
protection, and AC Fail and battery low contact outputs.
Relays can be configured to supply power as follows:
Available Power:
The ES400 is capable of
supplying a total of 700 mA to field devices. This power may be shared between
a reader and one or two additional field devices.
Unpowered, relay contacts are rated for 2 A @ 30 VDC
Note: Use of a Listed Access Control / Burglary power-limited power
supply is required for all Listed installations.
The ES400 is intended for use in indoor environments that comply with
the following specifications:
Operating Temperature
32° to 122° F (0° to 50° C)
Operating Humidity
5% to 95% relative, non-condensing
Communication Ports
Ethernet – 10 or 100 Mbps Reader - Wiegand, HID Clock-and-Data
Certifications
UL 294 Listed Component for the US, CSA 205 for Canada,
FCC Class A Verification, ICES-003 Class A Canada, EU (CE Marking), Australia
(C-Tick Mark), New Zealand
Warranty
Warranted against defects in materials and workmanship for 18 months
(See complete warranty policy for details).
| 
