The BIO500 biometric Module is an field upgradeable option to our RWKL550 LCD
reader, which will provide users multiple layers of identity authentication.
Combining a contactless card presentation with a fingerprint biometric.
The bioCLASS products provide three levels of fingerprint verification.
During this enrollment process, the fingerprint template is stored ONLY on the
card; it is never transmitted to an external host. During verification at the
door, the RWKL550 LCD graphical display will assist the user with instructions
about finger placement on the biometric sensor.
The finger pad at the bottom center of the biometric unit offers ease-of-use
for either single or dual finger enrollment.
The location of the finger pad is compliant with ADA standards.
Fingerprint templates are stored on the iCLASS card and not in the reader.
This results in:
Increased security
Faster throughput
Easier system management
Lower costs for the biometric reader
Reduced concerns over individual privacy
 Installation Guide
***** Model Numbers
6181BxT (Wiegand and RS232)
6181Bx4 (Wiegand and Full-Duplex RS485)
6181BxU (Wiegand and USB)
6181BxB (Wiegand and UART)
Read Range
iCLASS Card: Up to 4” (10.2 cm)
iCLASS Key/Tag: Up to 1.25” (3.2 cm)
Mounting
Mounting plate attaches to US/EU/ Asian back box, 52-60 mm screw hole spacing (vertical or horizontal). LCD/Keypad reader housing latches onto mounting plate; fingerprint module secured to reader with a screw.
Dimensions
8.43” x 4.17” x 2.28” (21.4 x 10.6 x 5.8 cm)
Power Supply
9-12 VDC, Linear supply recommended
Current Requirements
245 mA AVG, 299 mA PEAK
Operating Temperature
32ºF to 113ºF (0ºC to 45ºC)
Operating Humidity
5% to 95% relative humidity non-condensing
Cable Distance
Wiegand/Clock-and-Data Interface: 500 ft (150 m) (22AWG), RS232: 50 ft (15 m), RS485: 4000 ft (1220 m), USB: 16 ft (4 m), UART: 1 ft (0.30 m)
Transmit Frequency
13.56 MHz
Card Compatibility
iCLASS 15693 & 14443B - read-only on 16k bit (2k Byte), 32k bit (4k Byte); HID Application
iCLASS 15693 & 14443B - read/write (RWKLB575 only) on 16k bit (2k Byte), 32k bit (4k Byte); Application Space
Environmental
Indoor only
Certifications
UL294/cUL (US), FCC Certification (US), IC (Canada), CE (EU), C-tick (Australia, New Zealand),
SRRC (China), MIC (Korea), NCC (Taiwan), iDA (Singapore), RoHS
Housing Material
UL94 Polycarbonate
Fingerprint sensor type
Optical
Resolution
500 dpi, 256-bit gray scale, 18 x 22 mm sensor area
Timing
Card read < 0.5 sec
Fingerprint capture < 2 sec, typical 1 sec
Verification of captured finger < 1 sec
False Accept/Reject Rate
FAR < 0.01%, FRR < 0.01%
Warranty
Warrantied against defects in materials and workmanship for one year (See complete warranty policy for details.)
***** One serial hardware interface only supported by RWKLB575 with expansion module.
|
